Charging The Unit; Connecting The Ac Adapter; Checking Battery Status; Checking The Charging Status - LG PH1 Owner's Manual

8 Getting Started

Charging the Unit

Connecting the AC adapter

1
This device uses built-in battery. Before using it,
charge the battery by connecting the AC Adapter.
1. Connect the supplied USB cable to the AC
adapter.
2. Connect the USB cable to USB port of of the unit.
3. Plug the AC adapter into an AC outlet.
If the battery is fully charged in charging mode,
LED (RED) is turned off.
>
Caution
AC adapter is not supplied.
It is recommended that you use the 5 V AC
adapter approved by LG Electronics Inc. (more
than 1.8 A) with this speaker because of danger
of explosion. If you do not use the recommended
adapter, charging is unavailable or charging time
may differ.
(Not supplied)

Checking Battery status

When AC Adapter is connected, battery charging is
started. You can check the charging status by
(RED).
LED Condition
Battery LED turns
off.
Battery LED
blinks with the
sound.
Battery LED turns
on.
,
Note
y Operating time is approx. 5 hours. (Based
on fully charged the battery and continuous
playback using 50 % volume level.)
It may vary depending on the battery status
and operational conditions.
y If you listening the music while charging,
it will take longer to charge.

Checking the charging status

If the power turned on, you can check the charging
status by pressing 1/! button. Then Mood LED
light will blink depending on battery charging status.
Mood LED light
blinking
3 times
twice
once
,
Note
When Mood LED light turn off, you can check
battery charging status.
LED
Description
Battery is full
charged.
Battery is low.
(Power on)
Battery is
charging.
Battery
Status
60 %
60 %
60~25 %
60 %
60~25 %
25 %
60~25 %
25 %
25 %