Table Of Contents - Apollo HF3445/40 User Manual

Read These Safety Guidelines Before Using Your Daybreak
Observe these safety instructions to avoid potential hazards that could result in personal
injuries or damage to your Daybreak.
• Never connect your Daybreak to a fluorescent, compact fluorescent, low-voltage
halogen lamp, or any lamp with a transformer or ballast. Use incandescent or
line-voltage halogen lamps only, up to 200W.
• Do not connect any non-lamp devices to the Daybreak. The Daybreak is engineered to
work with incandescent lamps only.
• Never use damaged or worn cords or plugs-this could result in electric shock, burns,
and/or fire.
• Don't place objects on top of the power cords or the Daybreak.
• When unplugging the Daybreak or a connected lamp, grasp the plug directly to avoid
damaging the cord. Never pull on the power cord to remove a plug from the socket.
• Avoid spilling liquid into any part of the device. Never expose your Daybreak to water
or rain. The Daybreak is approved for indoor use only.
Contents:
®
Introduction ........................................................ 4
TrueDawn™ Technology ...................................... 5
Display Layout .................................................... 7
Button Layout ..................................................... 8
Setting Up Your Daybreak .................................. 9
Using Your Daybreak ........................................ 12
Frequently Asked Questions ............................ 23
Service and Repair ............................................ 26
3