Technical Data; Noise Emission; Contents Of Delivery; Transport And Start Up - Jet JWL-1221-M Operating Instructions Manual

4.2 Technical data

Swing over bed
Swing over tool rest base
Centre distance
Number of spindle speeds
360, 850, 1230, 1510, 2180, 3280 rpm
Spindle nose
Headstock spindle taper
Spindle indexing
Spindle hole diameter
Tailstock spindle taper
Tailstock hole diameter
Tailstock ram travel
Centre above workbench
Overall (LxWxH)
Net weight
Mains
Motor power
Reference current
Extension cord (H07RN-F):
Installation fuse protection
Isolation class

4.3 Noise emission

Acoustic pressure level
(EN ISO 11202):
Idling
In operation
The specified values are emission levels and are not
necessarily to be seen as safe operating levels.
As workplace conditions vary, this information is intended to
allow the user to make a better estimation of the hazards and
risks involved only.
4.4 Content of delivery
Live centre
Spur centre
tooling knockout bar
Tool caddies / Cord wrap
150 mm tool rest
250 mm tool rest
75 mm face plate
Operating tools
Operating manual
Spare parts list.
318mm
240mm
500mm
6
M33x3,5 DIN 800
MT 2
24x15°
9,5mm
MT 2
9,5mm
57mm
375mm
853x280x450mm
55 kg
1~230V, PE, 50Hz
0,56kW (0,75 HP)
2,7 A
3x1,5mm²
10A
I
LpA 67,4 dB(A)
LpA 76,5 dB(A)

5. Transport and start up

5.1 Transport and installation

The machine is designed to operate in closed rooms and must
be placed stable on firm and levelled surface.
For safety reasons, the machine must be bolted to the work
bench or to the optional stand.
For packing reasons the machine is not completely assembled

5.2 Assembly

If you notice transport damage while unpacking, notify your
supplier immediately. Do not operate the machine!
Dispose of the packing in an environmentally friendly manner.
Fig 3
Fig 4