NEC Express5800/R320g-E4 Installation Manual page 48

Chapter 1 Installing Operating System
When VMRC starts up, the following message may appear.
If this message appears, select "Allow", "OK", etc.
48
If the message "Failed to connect to ESXi..." appears in Connect to Server, check that
Important
the DNS server is specified in the OS network setting of the terminal in which Host
Client is used. If the DNS server is not specified, restart VMRC after specifying the
DNS server or use the terminal in which the DNS server is set.
Express5800/R320g-E4, R320g-M4 Installation Guide (VMware)
1. Setup Procedure