LG Cinema 3D Sound Blu-ray BH9630TW Simple Manual page 23

9. Press ENTER (b) to verify the test tone signals of
the speakers.
After verifying the test tone signals, press ENTER
(b) while [Stop] is highlighted. Select [Next]
and press ENTER (b).
10. You can listen to TV sound through this unit's
speaker automatically when TV is turned on. TV
and this unit should be connected with optical
cable.
Press W to move and press A/D to select [On]
or [Off ]. Select [Next] and press ENTER (b).
11. Check all the settings that you have set in the
previous steps.
Press ENTER (b) while [Finish] is highlighted
to finish the initial setup settings. If there is any
settings to be changed, use W/S/A/D to
select 1 and press ENTER (b).
BH9630TW-MX.BPERLLK_BPANLLK_SIMPLE_ENG.indd 23
System Setting 23
13. 4. 16.
3
10:39