LC-32LE280X/LC-40LE280X
CHAPTER 3.
ADJUSTMENT
[1] ADJUSTMENT ( LC-32LE280X )
[1] ADJUSTMENT PROCEDURE
1.Entering and cancel the adjustment process mode
1)While holding down the POWER and CENTER keys at the same time,plug in
the AC cord to turn the power.
2).Backlight turned ON,screen disply show Black pattern and LED blinking GREEN.
3)Enter password "UP ( CH UP )-->DOWN (CH DOWN )--> UP (CH UP )". (After 30 sec password not
keyed in or password keyed in wrong, go to previous Power Status (On,Stand by or OFF ).
4).Backlight turned On , screen display show Purple test pattern ( LED still blinking GREEN .
5).Press and hold the Center key . ( The adjustment process mode screen appears. )
6).After run function, LED light to GREEN.
2.Remote controller Key operation and description of disply in adjustment process mode.
1.Key Operation
Remote controller Key
CH ( / )
VOL ( + / - )
Cursor ( / )
Cursor ( / )
INPUT
controller
E
N
E T
* Input mode is switched
UP/DOWN
LEFT/RIGHT
or remote
R
when relevant adjustment is started so far as the
JOY Key
-
-
Changing a selected line
Input source switching (toggle switching )
CENTER
(DTV - ATV- HDMI 1- HDMI 2 - INPUT 3 -USB )
-
3 – 1
Changing channel (UP/DOWN)
Changing volume (UP/DOWN)
Turning a page (PREVIOUS /NEXT)
(+10 /-10 )
Enter
input signal is available .