Philips HR8378/07 User Manual page 7

C
2 Switch the appliance on by pushing the on/off button on top of
the appliance with your foot.
C
3 To carry the appliance, put the handle in upright position and
lift the appliance by the handle.
Adjusting suction power
You can adjust the suction power during vacuum cleaning:
C
1 Adjust the suction power by means of the electronic suction
power control (specific types only).
Infrared remote control (specific types only)
C
1 Place the batteries in the battery compartment.
Make sure the - and + poles are pointing in the right direction.
C
2 With the infrared remote control you can set the suction
power to one of 5 different suction power settings.When you
switch the appliance on, it will always start running at the
highest suction power setting.
ENGLISH
7