Chapter 3 - Assembly - ALDI KLMC15W User Manual

Chapter 3 - Assembly

Assembly
1. Remove the product from the packaging and disassemble the components. To remove
the bowl from the base of the unit, turn the bowl counterclockwise.
NOTE: The bowl may be slightly difficult to remove when the product is new. To aid in the
removal of the bowl, place the base of the unit onto its side on a soft surface and then firmly
turn the bowl counterclockwise to remove.
2. Thoroughly wash the cover (lid), bowl, and blade assembly in warm, soapy water. Rinse
the parts and let them dry.
Handle the blades with care as they are extremely sharp. Use caution when attaching,
detaching, cleaning or storing the blade assembly.
3. Place the base of the unit onto a level
and stable surface.
4. Place the bowl over the metal shaft and
turn the bowl clockwise until the safety
latches of the container bowl lock into
the base of the unit. This prevents the
bowl from detaching, specifically during
operation. (Fig. A & B)
5. Attach the blade assembly by carefully
holding onto the opposite end of the
blades and insert the blade assembly
(blades first) securely over the center
column of the bowl.
6. ALWAYS attach the cover (lid) after
inserting food into the bowl. (Fig. C)
NOTE: The cover (lid) must be securely
locked into its position before operating the
Mini Food Chopper. When properly locked,
the arrow inscribed on the handle of the
cover (lid) will align with the arrow inscribed
on the base of the unit (near the ON/PULSE
button).
10
cshelp@cnaii.com
MODEL: KLMC15W PRODUCT CODE: 7307-15 01/2015
Fig. A
Unlocked
Safety Latch
Fig. B
Locked
Safety Latch
Fig. C
AFTER SALES SUPPORT
Mini food chopper
888 775 0202