Tailgate Wrap Test Messages - IBM 3720 Problem Determination Manual

Communication controllers
Hide thumbs Also See for 3720:
Table of Contents

Advertisement

Tailgate Wrap Test Messages
BUFFERS NOT AVAILABLE: WRAP TEST STOPPED
Cause:
The eeu control program stopped the wrap test because no more
buffer space is available (control program overloaded).
Action:
Retry later.
BUFFERS TEMPORARILY NOT AVAILABLE: WRAP FUNCTION CANCELED
Cause:
The buffers are not available for the moment. The Wrap Test function
is canceled.
Action:
Select the Wrap Test function another time and try again.
CABLE NOT INSTALLED
Cause:
The line that you specified is considered as not installed because there is
no cable between the LIe and the modem.
Action:
Enter the address of an installed line.
CCU/MOSS ERROR: WRAP FUNCTION CANCELED
Cause:
A physical error occurred when communicating with the eeu. The
Wrap Test function is canceled.
Action:
Check that the eeu is correctly IPLed and that MOSS is online (MSA
field c should display MOSS-ONLINE).
Select the Wrap Test function another time. If the problem persists, contact the
hardware service representative (page viii).
CDF NOT CREATED: WRAP FUNCTION CANCELED
Cause:
The 3720 configuration data file has not been tested.
Action:
Contact the hardware service representative (page viii).
DISKETTE ERROR: WRAP FUNCTION CANCELED
Cause:
A physical error occurred when accessing the diskette. The Wrap Test
function is canceled.
Alarm A3 is displayed.
Action:
Select the Wrap Test function another time. If the problem persists,
contact the hardware service representative (page viii) and provide the reference
code displayed with the alarm.
Tailgate Wrap Test
8-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

3721

Table of Contents