Notes
Security
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
●
Observe national provisions and comply with the appropriate safety regulations.
Engineering
●
The device offers plug and play functionality.
●
The device is powered via the connected controller on the KNX PL-Link interface or the
jack connector.
NOTICE
De-energize the controller before wiring the device.
Mounting
●
The devices are suitable for wall mounting or panel mounting.
●
Recommended height: 1.50 m above the floor.
●
Do not mount the devices in recesses, shelves, behind curtains or doors, or above or
near heat sources.
●
Avoid direct solar radiation and drafts.
Siemens
Smart Infrastructure
CAUTION
5
A6V11519429_en--_a
2019-01-28