How To Maintain Your Vacuum Cleaner; How To Maintain Dust Cup, Filters And Brushroll - Eureka NEC180 Series Owner's Manual

How to maintain your vacuum cleaner

!
CAUTION
Never operate vacuum
in proper position.
WARNING: Moving parts!
Recharge cleaner after
each use.
1. Press
2. Pull out
1. Click the dust cup release button,
located on the front of the handle
just above the dust cup and pull dust
cup out.
2.
dust frequently. Every three months
To avoid unnecessary service calls, periodically check brushroll for debris. If brushroll gets clogged
it will automatically shut off. Turn vacuum off and unplug before attempting to remove clog.
!
Make sure vacuum cleaner is turned off and not
plugged into a power source.
WARNING: Do not attempt to remove belt.
Call the Eureka Customer Service HELPLINE
at 1-800-282-2886.
If debris cannot be removed easily, locate the brushroll release
tab on the right side and open the brushroll cover. Remove the
brushroll and clear any tangled hair and remaining debris.
2. Pull out
Click the dust cup release button, located
on the front of the handle just above the
dust cup and pull dust cup out.
3. Reattach filter and Cyclone.
4. Click dust cup back into place on unit.
How to maintain brushroll
Washable brushroll – clean frequently
CAUTION
Dust cup – Empty after each use
1. Press
24h
3. Shake to remove dust.
To reassemble:
2. Press other end into slot.
3. Replace brushroll release tab into slot and press down
to click it into place.
3. Press
Press lever to release bottom lid of dust cup
to empty debris.
www.eureka.com
24h
Click!
9