Kenmore 796.4158 Series Use & Care Manual page 4

IMPORTANT SAFETY INSTRUCTIONS
persons when using this appliance, follow basic
precautions, including the following.
Never use harsh chemicals, abrasive cleaners, or
solvents to clean the washer.
Do not put oily or greasy rags or clothing on top of
the washer.
Do not wash items that are soiled with vegetable or
cooking oil.
Disconnect this appliance from the power supply
before attempting any user maintenance. Turning the
controls to the OFF position does not disconnect this
Refer to INSTALLATION INSTRUCTIONS for detailed
grounding procedures.
Do not, under any circumstances, cut or remove the
third (ground) prong from the power cord.
For personal safety, this appliance must be properly
grounded.
The power cord of this appliance is equipped with a
3-prong (grounding) plug which mates with a standard
3-prong (grounding) wall outlet
This washer must be plugged into a 120VAC, 60Hz
grounded outlet.
Have the wall outlet and circuit checked by a
grounded.
Where a standard 2-prong wall outlet is encountered,
it is your personal responsibility and obligation to
have it replaced with a properly grounded 3-prong
wall outlet.
Do not install on carpet. Install the washer on a solid
Do not remove grounding prong. Do not use an
adapter or extension cord. Plug into a grounded
3-prong outlet.
WARNING
WARNING
appliance from the power supply.
Do not combine detergents, fabric softeners, and/or
other
Do not mix chlorine bleach with ammonia or acids
such as vinegar. Follow package directions when
using laundry products.
Do not reach into the washer while parts are moving.
Before loading, unloading, or adding items, push in the
cycle selector knob and allow the drum to coast to a
complete stop before reaching inside.
WARNING
WARNING
The washer should always be plugged into its own
individual electrical outlet which has a voltage rating
that matches the rating plate.
Never unplug your washer by pulling on the power
cord.
Immediately repair or replace all power cords that
have become frayed or otherwise damaged. Do not
use a cord that shows cracks or abrasion damage
along its length or at either end.
When installing or moving the washer, be careful not
to pinch, crush, or damage the power cord.
The washer must be installed and electrically
accordance with local codes
The washer is heavy. Two or more people may be
needed to install and move the appliance.
Store and install the washer where it will not be
exposed to temperatures below freezing or exposed
to outdoor weather conditions.
To reduce the risk of electric shock, do not install
the washer in humid spaces.
4