Table of Contents
Advertisement
11. Product overview
3. Warnings
11. Product overview
11.1. Front panel
1
1
The front panel consists of an outer front with air intake and a centered user interface. The user interface has LEDs
for monitoring and six recessed touch buttons for control.
Rack ears for 19 inch rack mount
1
Exterior front grille (also air intake and dust lter holder)
2
FRAME LED – Provides status indication for a number functions affecting the ampli er frame
3
TEMP LED – Provides status indication for internal temperatures sensed at multiple points, including power
4
supply, DSP and output channels
PSU LED – Provides status indication on functionality of Power Supply Unit and mains supply, including under–
5
and over–voltage, power supply faults, and unstable mains supply
POWER LED and TOUCH BUTTON – Provides power state indication and control. Press and hold button to
6
toggle the ampli er between ON and STANDBY state. LED indication given in Table 11.1.
LOAD LED – Provides load related status indication for monitoring functionality of LoadSmart and LoadPilot.
7
Warnings and faults indicate problems or anomalies detected in the connected loudspeakers and/or cabling
AMP LED – Provides ampli er related status indication, including faults and warnings related to temperature,
8
over–current, clipping and very high frequency
SIGNAL LED – Provides signal related status indication, including no signal and input signal clipping
9
MUTE LED and TOUCH BUTTON – Provides mute status indication and control. The LED is indicating
10
both Lake mutes and power channel mute. A single touch on the mute button toggles the power channel mute
between mute and unmuted states
22
D SERIES Lake Quick Start Guide rev 3.0.4
3
4
7
8
9
5
6
11
- Quick Links:
- Network Setup
Hide quick links:
Advertisement
Table of Contents
