Connecting The Host Computer To The Printer - Epson TM-930II Series Operator's Manual

2-2 Connecting the Host Computer to the Printer

Connecting the interface cable
Connect the printer with the host ECR (the host computer) using an interface cable
conforming to specifications.
Connect the interface cable according to the following procedure.
Turn off the printer and the host computer.
Connect the interface cable to the interface connector on the printer in the
correct orientation.
When connecting the drawer kick-out connector, attach as shown in the Figure
C.
a. Serial Interface
NOTES:
This printer comes installed with inch-type hexagonal lock screws to fix the
l
interface cable to the interface connector.
If you plan to use an interface cable which requires millimeter-type lock
l
screws, please replace the inch-type screws with the included millimeter-
type screws using a hex screwdriver (5 mm).
c. Example Drawer Kick-out Connection
b. Parallel Interface
Drawer Kick-out Cable
6
Earth Wire