Whirlpool AFG 3340 Instructions For Use Manual page 3

Regulating the temperature inside the freezer
The appliance is normally factory set to operate at the recommended temperature of -18°C.
To vary the internal temperature between -16°C and -24°C :
• Press button E once to adjust the internal temperature: the digital display indicates the
temperature set previously .
• Each time the button is pressed, the temperature is modified by 1°C: the value varies cyclically
between -16°C and -24°C.
• Five seconds after the button has been pressed for the last time, the temperature set is stored,
the display stops flashing and the current internal temperature is displayed .
Note:
The digital display displays internal temperature values between +10°C and -24°C.
Selected functions are retained in the memory even during power failures.
Rapid freezing
The rapid freeze function is automatically deactivated after 48 hours.
Alarm indications
Door open alarm
Temperature
alarm
Temperature
alarm sensor
Prolonged
power failure
alarm
Note:
The temperature alarm is also activated if the door is left open for a long period or after fresh food has
been placed in the freezer compartment; the temporary rise in temperature does not affect perfect
storage of already frozen foods.
Defrosting
1. Press the freezer on/off button D.
2. Unplug the appliance or disconnect power
at the mains .
3. Follow the instructions given in the
instruction booklet
4. Plug in the appliance again.
5. Press the freezer on/off button D.
5019 100 40023
PRODUCT CHART
Indication
Acoustic alarm activated
The acoustic alarm and
red light C are activated
The acoustic alarm is
activated and the display
shows "SF"
The acoustic alarm and
red light C are activated;
the display flashes
indicating the highest
temperature reached
following the power
failure.
D GB F NL
Cause
The door has been left open
for more than one minute
Internal temperature is
higher than -12°C
Temperature sensor fault
Prolonged lack of power
supply, causing the internal
temperature to rise to very
high values at which proper
food storage cannot be
guaranteed
An illuminated dot appears on the digital
display
Follow the procedure for "Starting up the
appliance"
E I GR
P
Solution
Shut the door
Press button G and
wait for the
temperature to fall
below -12°C
Contact Customer
Service.
Press button G; the
display now indicates
the current internal
temperature.
S N DK FIN