Apollo HF3230/60 User Manual page 11

Turning On the goLITE
Push POWER to turn the goLITE display on or off.
Setting the Clock
While holding down BOTH the TIMER and ALARM buttons, push the + or - button
to adjust the clock. Hold down the + or - button to cycle through the clock time quickly.
Quick On
To turn the light source on or off, push LIGHT.
(Diagram 2)
Timing a Session
To start a timed session, press TIMER. The timer icon and minutes will flash. Select the desired usage
time by pressing the + or - button. After a three-second delay, the light source will automatically turn on
and begin counting down.
Pausing a Session
Press the LIGHT button to pause a timed session. Press LIGHT again to continue the session.
Changing the Session Time
To change the timer while the goLITE is on, press TIMER, then push the + or - button to set the new
desired time.
Changing the Intensity
While the light source is on, you can change light intensity by pushing the + or - button. You can choose
intensity settings in increments of 10%.
9