Philips X809 Manual page 9

If the option
Query On Power Up
>
Settings SIM settings
configure the SIM card setup or not once the device
is turned on:
1
Check that your phone is turned on. Enter the
PIN code if required.
2
Go to
SIM settings
Tap on to confirm your settings.
Done
3
Select SIM1 or SIM2 to be the primary card.
Note:
•
The PIN code is preconfigured and communicated to
you by your network operator or retailer.
•
If you enter an incorrect PIN code three times in
succession, your SIM card will be blocked. To unblock it,
you must request the PUK code from your operator.
•
If you enter an incorrect PUK code ten times in
succession, the SIM card will be locked permanently.
When this happens, please contact your network
operator or retailer.
8 Getting started
is enabled in
, the phone will ask you to
> /
Slot 1 Setup Slot 2 Setup
Profiles
The profiles are defined for several scenes. They
consist of the settings for ringtones, volume, and
others. With preset profiles, you can easily adjust
the settings as desired.
1
Go to , tap on
Profiles
profile.
2
Enter into
Options
and others.
Note: If you select Flight mode, you disable the connection
between your phone and your mobile phone network.
to activate the
Activate
to
modify ringtones, volume