Removing And Installing The Keyboard Controller - Siemens SIMATIC PC BI10 Technical Description

System Unit
1.4.4

Removing and Installing the Keyboard Controller

Caution
!
Release the socket connector locking before removing the connecting cables
to avoid any damage to the foil coating.
Please proceed in reverse order to reassemble the unit.
Figure 1-13 Removing the Keyboard Controller in the FI10
1-18
Open the PC as described in Section 1.4.1.
Remove the two connecting cables of the membrane keyboard.
Before disconnecting all cables please write down their previous
connections.
Release the four mounting screws, then take out the keyboard controller
module.
SIMATIC PC BI10/FI10/FI15, Technical Description
C79000-G7076-C773-03