Jet HBS-916 Operating Instructions And Parts Manual page 7

1 Subject to local/national electrical codes. Circuit must be protected by appropriately rated fuses or breaker.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height
T = thickness
Dia = diameter
SFPM = surface feet per minute
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.
7