Graco A Series Repair Manual page 8

Service
4. Soak all leather packings in SAE 30W oil for one
hour minimum prior to assembly. Place male gland
(204) in cylinder. Alternately stack UHMWPE (203)
and leather packings (223) (note orientation). Place
female gland (224) in top of cylinder seat packings.
203
ti7573g
5. Install seal (201) into packing nut (202). Install
o-ring (228) onto packing nut. Loosely install pack-
ing nut into cylinder.
201
202
228
ti7581b
8
Not
used on
16X414,
16X418
224
223
204
6. Grease piston packings.
ti7578d
Do not slide piston assembly into top of sleeve as this
may damage piston packing.
7. Slide piston assembly into bottom of sleeve.
ti7577b
8. Grease top inch or two of piston rod that will go
through the cylinder throat packings.
NOTICE
ti7579b
332922D