Manual Information; Revision History; Manual Purpose; Intended Audience - GE MAC 800 Service Manual

Introduction

Manual Information

Revision History

Manual Purpose

Intended Audience

Warnings, Cautions, and Notes

1-2
The document's part number and revision appear at the bottom of each
page. The revision identifies the document's update level. The revision
history of this document is summarized in the following table.
Revision History, PN 2031504-159
Revision Date
A 1 July 2008
B 15 August 2008
C 24 July 2009
D 15 January 2010
This manual supplies technical information for service representatives
and technical personnel so they can maintain the equipment to the
assembly level. Use it as a guide for maintenance and electrical repairs
considered field repairable. Where necessary, the manual identifies
additional sources of relevant information and/or technical assistance.
See the MAC™ 800 Resting ECG Analysis System Operator's Manual
(2031504-182) for the instructions necessary to operate the equipment
safely in accordance with its function and intended use.
This manual is intended for persons who use, maintain, or troubleshoot
this equipment.
The terms danger, warning, and caution are used throughout this
manual to identify hazards—sources of potential injury to a person—and
to designate a degree or level or seriousness. Familiarize yourself with
their definitions and significance.
MAC™ 800
Comment
Initial release of document.
Revised product specifications.
Updated Euopean address on back cover

Added 2GB SD Card to Parts List

Corrected IEC standards in Appendix A

Miscellaneous corrections and improvements

Added Cell FRU number to Parts List

Add Cell FRU replacement procedure to

Maintenance Section.
2031504-159D