Preparation Before Operations; Step 1: Checking The Package Contents; Step 2: Checking The Necessary Files; Step 3: Writing A Memo With The Versaworks Settings - Roland VersaEXPRESS RF-640 Manual

Preparation before Operations

STEP 1: Checking the Package Contents

This kit contains the following items. Make sure they are all present and accounted for.
Items used during ink switching
Cleaning sticks
Felt wiper (1)
Items used after ink switching (not used during ink switching)
Cleaning liquid (1)
(dedicated for use with
MAX 3 ink)
* Use one wiper and one felt wiper during the ink switching operation. Use the other wiper and felt wiper as replacements
at a later time.
* You must prepare the replacement ink yourself.

STEP 2: Checking the Necessary Files

The firmware and updater downloaded from http://www.rolanddg.com/ecosolmax3/ are necessary for the operations in
this manual.
Check that the following files are present.
 Firmware: RF640Firm170.exe (in the "Firmware" folder)
 Updater: LocalUpdater.exe (Ver. 5.5.0 or later; in the "Roland VersaWorks local updater" folder)
If the above files are not present, download them from the following URL.
http://www.rolanddg.com/ecosolmax3

STEP 3: Writing a Memo with the VersaWorks Settings

Important
As the final step when you switch the ink, update VersaWorks to a version that supports MAX 3 ink. After the update, because
the printer that has been switched to MAX 3 ink will be connected as a new printer, the previous job data and settings will be
deleted. Before switching to MAX 3 ink, write down the IP address and the settings of the connected printer such as "Quality."
4
ECO-SOL MAX 3 Ink Switching Method
Tweezers (1)
Drain bottles (2)
Wiper (1)
Gloves (1 set)
Drain funnel (1)
Felt wiper (1)
Wiper (1)