Getting Started; Mounting The Tv On A Wall; Connecting The Aerial And Mains; Putting Batteries In The Remote Control - Philips 26HF7875/10 User Manual

Getting started

Mounting the TV on a wall

This TV is compatible with the VESA wall
mounting standard. Please contact your local
electronics retailer for a VESA compliant
bracket to wall mount this TV.
Insert the cables into the TV before you
mount it on the wall.
Ensure that there is a distance of at least 30
mm between the wall and the back of the
TV. For sets with sub-woofer, an additional
10 mm is required for optimal sound effect.

Connecting the aerial and mains

Insert the aerial plug and the mains cord
firmly into their respective socket at the
bottom of the TV before connecting them
into the wall socket.
6
How to switch your TV on
To switch the TV on, press the POWER
key on the side controls. A green indicator
light comes on and after a few seconds the
screen lights up.
If the TV set remains in stand-by mode,
the indicator light remains red. Press the
PROGRAM +/- key on the side controls or
press the TV +/- key on the remote control.
Putting batteries in the remote
control
Insert the batteries into the remote control,
ensuring that the + and - ends of the
batteries are aligned correctly. The correct
alignment is indicated inside the casing of the
remote control.