Store Settings - Philips Signature 46HFL4382D/10 User Manual

_______________________

Store Settings

To confirm the changes the settings has to be
stored.
select [Store] > [Confirm] to save the changes.
_______________________
Smartloader
Place a USB Memory stick in the side USB
connector
Layer 1 Layer 2
Smartloader Smartloader to TV
TV will read and store Cloning data from USB stick
Layer 1 Layer 2
Smartloader TV to Smartloader
TV will store Cloning data to USB stick
2. TV
Functionality
Setup Mode
instruction
To select specific TV functionality settings (i.e.
Channel settings, picture settings .etc) this can be
done in TV Setup Mode only.
To enter the TV Setup mode, it is necessary to
disable the Professional mode. To do this, change
the setting of BDS Mode in the BDS Mode Setting
menu to 'off', and store this setting.
Layer 1 Layer 2
BDS Mode Setting BDS Mode
Store Settings [OK]
After this the TV initiates a restart and will switch to TV Setup mode.
Now the Professional Setup Remote Control in RC6
Guest mode (press on the Professional Setup RC
the RC6 Guest button) and the TV Remote control
can be used to make the required setting.
The available options are described in the TV
Functionality Set reference DFU.
The TV Functionality Set reference to match a
hospitality TV is the following:
Hospitality Set reference
46HFL4382D/10
32HFL7382A/10
40HFL7382A/10
58HFL9582A/10
The TV Functionality Set reference DFU is available via the Philips
Hospitality Website: www.philips.com/hospitalitysolutions
After making the proper settings, activate the
Professional Setup Remote Control mode
(press the RC5 Setup button) and pressing
Home/Menu to active the BDS Setup Menu.
Layer 1
BDS Mode Setting
Store Settings
Layer 3
After this the TV initiates a restart and will switch to Standby.
OK
Layer 3
OK
Remote Control Alignment
Layer 3
Off
Layer 2
BDS Mode
[OK]
Professional Setup RC
Home [RC6 Guest]
__
TV Functionality Set reference
46HFL5605H/12
32PFL7605A/10
40PFL7605A/10
58PFL9955H/12
Layer 3
On
TV RC