Manual Channel Search - Philips MCP9360I/31 Quick Install Manual

Setup your speakers
This option enables you to specify and test your speaker configuration.
•
Always select the 2 speakers option since the Media Center offers analog stereo output only.
If you are using the digital audio connection:
After finishing the Media Center setup wizard, follow the instructions below:
1
Press the key (8) on the remote control.
> The Media Center Start menu appears.
2 Select More Programs and press the OK key (9)
3
Select DVD Settings and press the OK key (9)
4
Select Audio Settings and press the OK key (9)
5 Select SPDIF and press the OK key (9)
6 Select Save and press the OK key (9)
> After finishing the Optional Setup procedure, the Media Center's Start screen is displayed and your Philips Media Center is
ready for use.
Note: S/PDIF (Sony/Philips Digital Interface) is a standard audio transfer file format, usually found on digital audio equipment or audio
processing devices. It allows the transfer of audio without the conversion to and from an analog format, which could degrade the
signal quality.

Manual channel search

Search for analogue channels
For automatic channel search, see 'TV Guide function - Seeking a TV program' in the use cases.
1
Press the key (8) on the remote control.
2
Select More Programs and press the OK key (19).
3 Select TVScanner and press the OK key (19).
4 Select Readme and press the OK key (19).
5
Follow the instructions in the Readme file.
Search for digital channels
1 Confirm your region.
2
Select the TV signal: ´Antenna´.
3
Select the type of TV signal: ´Digital terrestrial (DVB-T)´.
4
Make your selection for a set-top box:
Select ´No´.
5
Read Guide privacy.
Select ´No´.
> The Scan for services window appears.
6
Select ´Start scan´. Follow the on-screen instructions.
22