Intro Play; Shuffle Play; Repeat Play; Connect External Sound Source - Philips CEM200/51 User Manual

Intro play

You can play the first 10 seconds of each track.
1
During play, press INTRO, 2 to select:
• [INT ON] : After the first 10
seconds of each track have been
played, play stops.
• [INT OFF] : Cancel intro play and
start normal play.
Shuffle play
You can play the tracks in random order.
1
During play, press SHUF, 4 to select:
• [SHUF ON]: start shuffle play for all
tracks.
• [SHUF OFF]: cancel shuffle play.

Repeat play

1
During play, press 3, REP repeatedly to
select:
• [RPT TRK] (repeat one track): play the
current track repeatedly.
• [RPT DIR] (repeat a folder): play all tracks
in the current folder repeatedly.
• [RPT ALL] (repeat all tracks): play all
tracks repeatedly.
• [RPT OFF]: cancel repeat.
Connect external sound
source
1
Connect the external sound source to
MP3 LINK socket with a 3.5 mm cable.
2
Press SOURCE repeatedly until [MP3
LINK] is displayed.
3
Operate the external component (refer
to the instructions supplied with the
external component).
18 EN

6 Adjust sound

Adjust volume

1
Turn clockwise/anticlockwise to
increase/decrease volume.

Mute

You can turn off the sound of your audio.
1
During play, press MUTE
• To turn the sound back on, press
MUTE again.
Turn Dynamic Bass Boost
(DBB) on/off
1
Press DBB, the current setting is
displayed:
» [DBB ON] : The Dynamic Bass Boost
(DBB) function is on.
» [DBB OFF] : The DBB function is off.
2
Press DBB again to change the DBB
setting.

Select preset equalizer

1
Press EQ/Audio.
»
The current Equalizer setting is displayed.
2
Press EQ/Audio again repeatedly to
select a preset EQ:
• [OPTIMAL] (optimal)
• [FLAT] (flat)
• [POP] (pop)
• [USER] (user)
• [TECHNO] (techno)
• [ROCK] (rock)
• [CLASSIC] (classic)
• [JAZZ] (jazz)
.