Connecting To Power; Inserting Batteries - The Singing Machine SMK198 Instruction Manual

Connection

Connecting to Power

Insert the USB cable (not included)
into micro USB port on rear of the
unit. Plug the other end of the cable
into computer USB port or other USB
charging device (not included)

Inserting Batteries

1
Slide the battery door in the direction the
arrows to reveal the battery compartment.
Insert four (4) "C" size alkaline batteries
(not included) as indicated on the diagram.
2
Replace cover tightly before operating.
BATTERY PRECAUTIONS:
Follow these precautions when using batteries in this device:
1. Warning – Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
2. Use only the size and type of batteries specified.
3. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. A reversed battery may cause damage to the device.
4. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old
batteries with fresh ones.
5. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury
from possible battery leakage.
6. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow
battery manufacturer's directions.)
7. Remove batteries promptly if consumed.
8. Clean the battery contacts and also those of the device prior to battery installation.
— E5 —
INSTALLATION OF BATTERIES
'C' SIZE, UM-2 'C' SIZE, UM-2
1.5V 1.5V
'C' SIZE, UM-2 'C' SIZE, UM-2
1.5V 1.5V
'C' SIZE, UM-2
USB
cable
'C' SIZE, UM-2 'C' SIZE, UM-2
1.5V 1.5V
'C' SIZE, UM-2
1.5V 1.5V