Philips EXP3373/05 User Manual page 5

HEADPHONE / IN-CAR USE
HEADPHONE HE225/HE270
• Connect the supplied headphones to the LINE OUT / p socket of the player.
Helpful Hints:
• LINE OUT/p can also be used to connect this set
with your HiFi system. To adjust the sound and vol-
ume, use the controls on the connected audio
equipment and the CD player.
IMPORTANT!
Hearing safety: Do not play your headphones at a high volume. Hearing experts
advise that continuous use at a high volume can permanently damage your hearing.
Traffic safety: Do not use headphones while driving a vehicle. It may create hazard
and it is illegal in many countries.
IN-CAR USE (connections not included)
Put the set on a horizontal, vibration-free and stable surface. Make sure it is in a
safe place, where the set is neither a danger nor an obstacle to the driver and
passengers.
PLAYING A CD, VOLUME AND SOUND
To stop playback
• Press 9.
For an audio CD, the total number of tracks and
the total playing time are displayed. For a
MP/WMA-CD, the total numbers of tracks and
albums are displayed respectively.
• Press 9 again to switch off the player.
• To remove the CD, hold it by its edge and press the hub gently while lifting the CD.
Helpful Hints:
– If there is no activity, the set will automatically switch off after 90 seconds.
Volume adjustment
-/+
• Adjust the volume by using VOL
headphone.
Bass adjustment
There are three DBB (Dynamic Bass Boost) options:
– Off: no bass enhancement
– : moderate bass enhancement
– : strong bass enhancement
• Press DBB once or more to select your option.
appears if DBB activated.
prog
album track
MP3-CD PLAYBACK
on the CD player or the slider on your
DYNAMIC
BASS
BOOST
PLAYING A CD
This CD player can play all kinds of Audio Discs
(including CD-Recordables and CD-Rewritables) and
MP3/WMA CDs. Do not try to play a CD-ROM, CDi,
VCD, DVD or computer CDs.
Push the OPEN 2 slider to open the player.
1
2
Insert an audio CD or a MP3/WMA CD, printed side
up, by pressing the CD onto the hub.
3
Close the player by pressing the lid down.
Press 2; to switch the player on and start playback.
4
For an audio CD: the current track number,
CDA-Track and elapsed playing time are dis-
played.
For a MP/WMA CD: the filename scrolls, current album/track number and
elapsed playing time are displayed.
Helpful Hints:
– Track type is indicated by the cursor 3 at WMA,
MP3 and CD respectively.
To pause playback
• Press 2;.
The elapsed playing time flashes.
• Press 2; again to continue playback.
TRACK AND ALBUM INFORMATION (for MP3/WMA CDs)
During playback, toggle DISPLAY to view information about your tracks/albums.
• Press DISPLAY once or more to see the following:
– Album : the album's folder name,
– Artist : the artist's name (if ID3 tag available)
– Title : the track title (if ID3 tag available),
track type and elapsed playing time.
– File name : the track's file name.
The selected information is shown, along with the
current album/track number and elapsed time.
Helpful Hints:
– For audio CDs, (Audio-Track) will be shown when you press DISPLAY.
– The ID3 tag is part of a MP3 file. It contains various track information, such as the
track's title or the artist's name. Try to get complete ID3 tag information with your
encoder software when burning a MP3/WMA-CD.
MP3-CD PLAYBACK
D
B
B
prog
album track
MP3-CD PLAYBACK