Summary of Contents for King Canada Powerforce PX-500
- Page 1 JUMP START / PERSONAL POWER SUPPLY MODEL PX-500 INSTRUCTION MANUAL COPYRIGHT © 2015 ALL RIGHTS RESERVED BY 140380 CANADA INC.
-
Page 2: Important Warranty Information
Please keep your dated proof of purchase for warranty and servicing purposes. PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts dia- gram and parts list. LIMITED TOOL WARRANTY Powerforce makes every effort to ensure that this product meets high quality and durability standards. -
Page 3: General Safety Instructions
Powerforce Jump Starter /Personal Power Source GENERAL SAFETY INSTRUCTIONS 1) KNOW YOUR TOOL. Read and understand the owners manual and labels affixed to the tool. Learn its application and limitations as well as its specific potential hazards. 2) DON’T USE this Jump Starter in damp or wet locations or expose it to rain. 3) FOLLOW INSTRUCTIONS. -
Page 4: Specifications
Powerforce Jump Starter /Personal Power Source GETTING TO KNOW YOUR JUMP STARTER / PERSONAL POWER SOURCE 1. Flashlight 9. Jump Starter cable terminal 2. DC output voltage indicator lights (12V, 16V, 19V) 10. Smart jumper cables 3. DC power port 11. -
Page 5: Charging Instructions
Powerforce Jump Starter /Personal Power Source CHARGING INSTRUCTIONS This Jump Starter may arrive partially charged from the manufacturer. Fully charge the Jump Starter immediately after purchase and before using for the first time. To prolong the life of the battery, it is recom- mended to fully recharge the Jump Starter after each use so that it is always ready for use in emergency situa- tions, or every 3 months even if the Jump Starter has not been used. - Page 6 Powerforce Jump Starter /Personal Power Source USING THE SMART JUMPER CABLES The smart jumper cables included with this kit come with safety features to protect and inform the user during use. The smart jumper cables come with a control box (A) Fig.3 which has an LED indicator light (B) which indicates the following situations;...
-
Page 7: Using The Led Flashlight
Powerforce Jump Starter /Personal Power Source USING THE USB PORT TO CHARGE/POWER USB POWERED DEVICE 1) Connect the 4-in-1 USB adapter cable (A) Fig.5 or a user- supplied USB cable to the USB port (B). Connect the appropriate connector to your USB powered device. 2) Move switch (C) to the “On”...