Setting The Clock - Philips AJ3650/12 User Manual

2 Always disconnect the mains adapter if you are not using the set.
Helpful hints:
To avoid damage to the set, use only the adapter supplied!

SETTING THE CLOCK

The clock uses 24-hour time format.
Important!
Pull out the plastic protective sheet to activate the clock backup battery
(CR2032). This battery is included and installed in the set.
Manual setting
1. Press and hold DATE/SET TIME to enter the clock setting mode.
™ Year digits start flashing.
2. Hold down or press TUNING +/- repeatedly to set the current year.
3. Press DATE/SET TIME to confirm.
™ Month digits start flashing.
4. Hold down or press TUNING +/- repeatedly to set the current month.
5. Press DATE/SET TIME to confirm.
™ Date digits start flashing.
6. Hold down or press TUNING +/- repeatedly to set the current date.
7. Press DATE/SET TIME to confirm.
™ Date and Month indicators, D and M, start flashing.
8. Press TUNING +/- repeatedly to set the desired date format.
9. Press DATE/SET TIME to confirm.
™ Hour digits start flashing.
10. Hold down or press TUNING +/- repeatedly to set the current hour.
11. Press DATE/SET TIME to confirm.
™ Minute digits start flashing.
12. Hold down or press TUNING +/- repeatedly to set the current minute.