Replacements & Calibration - Samsung HLS4676SX/XAA Service Manual

3-6 Replacements & Calibration
3-6-1 Tilt the Screen
1. Remove the 8 point screws. Remove the Bottom cover. The
back cover has to be pulled to the right before being pulled
backwards, due to the AIR FLOW guide gets caught on the
CHASSIS FRAME. Fix the safety switch on the right with tape
so that the set can be turned on after removing the bottom
cover.
: BH,+,B,M4,L12,ZPC(BLK),SWRCH18
3. Remove 3point screw covers. And then loose the 3 points
screws.
* Left 2 points screws
: PWH,S,M3,L8,ZPC(YEL),SWRCH18A
Samsung Electronics
2. After Remove the 2 point screws, pull out the optical
engine.Remove 1 point screw in the Fan assy. And the
turn counterclockwise fan assy.
Alignment & Adjustment
3-15