HP 81110A Quick Start Manual page 103

3 Press the
Switch the Output 1 and the Output 2
500 ns
set the trailing edge to
For Output 2 enter a double pulse delay of
leading edge of
Figure 55
4 Press the
Outputs.
For Channel 1 choose an offset of
2.00 V
For Channel 2 choose an offset of
2.00 V
Figure 56
HP 81110/04A Quick Start
softkey to enter the Timing menu.
|TIMING|
. For Output 1 enter a width of
TrailE = LeadE.
and set trailing edge to
3 ns
Current TIMING Screen
softkey to enter the Levels menu. Select
|LEVELS|
.
.
Current LEVELS Screen
Getting Started
Getting Started
. Enter a pulse period of
ON
, a leading edge of
100 ns
a width of
250 ns,
TrailE =LeadE.
and an amplitude of
0.0 mV
and an amplitude of
0.0 mV
Examples
and
3 ns
a
100 ns,
Separate
105