Knowing Your Tablet - AIPTEK Media Tablet Ultimate Quick Setup Manual

Media Tablet Ultimate Quick Setup Guide
Left-handed USB
1. Place the tablet on your desk in the direction you prefer to use it.
2. Select the USB port as shown in the above picture by using the
USB Socket Slider.
3. Connect the Media Tablet Ultimate to your PC or MAC with the
supplied USB cable. We recommend that you do not to connect
it to Hubs or front USB ports of your PC tower.
4. After connection, the large white Mode LED will light and the
small white left/right-hand indicator LED will also light.
5.

Knowing your Tablet

1. Working Area: The working area is the active area where the pen
responds. The usage is different to mouse usage. The working area
equates to your monitor and you can directly point to the place you
want to move the mouse to. If you move the pen to the bottom-left
corner, the pointer on your display directly goes to this point. This
makes work much more efficient and much quicker than using a
mouse.
Hot Keys
Navigation wheel
with Mode button
Hot Keys
USB Socket Slider
www.aiptek.eu
Right-handed USB
16:9
working area
Page 5