Rinnai INFINITY A Series Operation Manual

Continuous flow water heaters

Advertisement

Quick Links

INFINITY continuous flow water heaters
Operation guide

Advertisement

Table of Contents
loading

Summary of Contents for Rinnai INFINITY A Series

  • Page 1 INFINITY continuous flow water heaters Operation guide...
  • Page 2 Warning Improper installation, adjustment, alteration, service and maintenance can cause property damage, personal injury or loss of life. For more information about buying, using, and servicing of Rinnai appliances call: 0800 RINNAI (0800 746 624). Rinnai New Zealand Limited 105 Pavilion Drive, Mangere, Auckland...
  • Page 3: Table Of Contents

    Limited Warranty ..........12 Water quality ............14 Purchase details ...........15 Installer details............15 Continuous flow water heaters, like cars, require regular maintenance and servicing. For reliable operation Rinnai INFINITY continuous flow water heaters, in residential applications, should be serviced every two years.
  • Page 4: Warning About Hot Water

    Warning about hot water Excessively hot water is dangerous. Rinnai INFINITY continuous flow water heaters, through the use of water controllers, allow you to control the temperature of hot water to safe levels. Always • Test the water temperature with your elbow before placing your child in the bath, and feel the water yourself before bathing or showering.
  • Page 5: About Your Water Heater

    The installer needs to leave the commissioning checklist and this operation guide with you. Damage prevention in freezing conditions The Rinnai INFINITY water heaters require power to prevent damage in freezing conditions. DO NOT disconnect the power if there is a likelihood of freezing without draining the water heater.
  • Page 6: General Information

    Regular maintenance and servicing is not arrange for a plumber to drain the water to covered by the Rinnai warranty. Do not attempt prevent frost damage. If for practical reasons a to carry out any service work other than that plumber is unable to drain the INFINITY, there mentioned in this guide.
  • Page 7: Infinity Controllers

    Rinnai INFINITY will not heat the water. Turn off one tap is in use. the tap for a few seconds then turn on again.
  • Page 8: Troubleshooting Without Controllers

    Troubleshooting with controllers Rinnai INFINITY continuous flow water heaters have self-diagnostic capability. If a fault occurs, an error code will flash in the digital water controllers (or status monitor on selected models). This assists in diagnosing the fault—please state the code displayed when contacting Rinnai.
  • Page 9 Service reminder: Rinnai recommends commercial appliances are serviced annually. N-series models display a scheduled service reminder code 55 (when programmed to do so) when the annual service period has elapsed as a reminder that the water heater is due to be serviced. The reminder code flashes intermittently on the status monitor and water controllers (if fitted)—normal operation of the appliance is not affected.
  • Page 10: Draining The Water Heater

    Draining the water heater Frost protection is fitted as standard on all Rinnai INFINITY water heaters. Frost protection operates automatically, as required, as long as the appliance is connected to the power supply. If you live in an area prone to frost and will be 2.
  • Page 11 Please note: The hot water drain plug and water filter positions will vary depending on the model. The images below are to highlight what they look like. Water filter Hot water drain plug Water filter Hot water drain plug Rinnai INFINITY operation guide 02-20 | 11...
  • Page 12: Limited Warranty

    Under a pro rata warranty, if the heat exchanger fails before the end of the warranty, Rinnai will replace the heat exchanger at a cost that depends on the age of the heat exchanger at the time of the fault. For further details refer to the pro rata table on p.14.
  • Page 13 3. All appliances must be operated and maintained in accordance with the manufacturer’s operating instructions. 4. Servicing of the product is to be carried out by a Rinnai authorised service centre. 5. The warranty applies only to the components supplied by Rinnai. It does not apply to components supplied by others, such as electrical switches, electrical cables, fuses, isolating valves, pipework, and where applicable flue systems, but it is not limited to these.
  • Page 14: Water Quality

    Pro rata heat exchanger warranty table Under a pro rata warranty, if the heat exchanger fails before the end of the warranty, Rinnai will replace the heat exchanger at a cost that depends on the installation application and the age of the heat exchanger at the time of the fault.
  • Page 15: Purchase Details

    Date of purchase: Product details: Please keep these details in a safe place for future reference. Register your Rinnai INFINITY online at www.rinnai.co.nz/register/ for service reminders, product updates and special offers—you can unsubscribe at any time. Installer details Company name:...
  • Page 16 Rinnai.co.nz Operation guide barcode placeholder Tel: 0800 746 624 http://www.youtube.com/rinnainz U340-1335X01(00) http://facebook.com.rinnainz...

This manual is also suitable for:

Infinity ef seriesInfinity hd seriesInfinity n series

Table of Contents