Table of Contents
Advertisement
English
ACCESSORIES
1 x AC mains lead
1 x Remote Control (for AZ1515 model only)
TOP AND FRONT PANEL (See 1)
1 VOLUME 3 , 4 - to adjust volume level.
2 DBB (Dynamic Bass Boost) - activates a more vivid
bass response.
3 POWER slider - selects TAPE/ RADIO / CD func-
tion and also the power off switch (TAPE/ OFF).
4 BAND - selects waveband.
5 0-9: - digit panel
CD: - track selection and direct playback;
RADIO: - selecting a preset station.
6 PROGRAM
CD: - programs tracks and reviews the program;
Tuner: - programs preset radio stations.
7 SEARCH ∞ , §
CD: - searches backward and forward within a track;
- skips to the beginning of a current track/ previ-
ous/ later track.
RADIO: - (down, up) tunes to radio stations.
8 MODE - selects different play modes: e.g. REPEAT
or SHUFFLE (random) order.
9 2; - starts or pauses CD playback.
0 9 - to stop playback;
- erases a CD program.
! Display - shows the status of the set.
@ OPEN•CLOSE – opens/ closes the CD-tape door
# REMOTE SENSOR - (for AZ1515 model only)
infrared sensor for remote control.
$ CASSETTE RECORDER keys:
RECORD 0 - to start recording.
PLAY 2 - to start playback.
SEARCH 5 / 6 - fast rewinds/ winds tape.
STOP 9 - stops tape.
PAUSE ; - pauses playback or recording.
CONTROL/POWER SUPPLY
BACK PANEL
% Telescopic aerial - improves FM reception.
^ p - 3.5 mm stereo headphone socket.
Note: The speakers will be muted when headphones
are connected to the set.
& AC MAINS - inlet for mains lead.
* Battery compartment - for 6 batteries, type R-
14, UM2 or C-cells.
( Voltage selector (some versions only) - adjust to
match the local voltage 110/220V before plugging
in the set.
REMOTE CONTROL (for AZ1515 model only)
1 VOLUME 3 , 4 - adjusts volume level.
2 SHUFFLE - plays all CD tracks in random order.
3 2; - starts or pauses CD playback.
4 SEARCH 5 , 6 - searches backwards/
forwards within a track.
-
+
5 PRESET
,
(up, down) - selects a preset radio
station.
6 TUNING ∞ , § (down, up) - tunes to tuner stations.
7 9 - to stop playback;
- erases a CD program.
8 ¡ , ™ - skips to the beginning of a current track pre-
vious/ subsequent track.
9 REPEAT - repeats a track /program/ entire CD.
CAUTION
Use of controls or adjustments or performance of pro-
cedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
POWER SUPPLY
Whenever convenient, use the AC power supply to
conserve battery life. Make sure you remove the
power plug from the set and wall outlet before
inserting batteries.
Batteries (not included)
• Insert 6 batteries, type R-14, UM-2 or C-cells,
(preferably alkaline) with the correct polarity. (See 7)
• Remote control (AZ1515 model only)
Insert 2 batteries, type AAA, R03 or UM4 (prefer-
ably alkaline). (See 9)
POWER SUPPLY
IMPORTANT!
• Incorrect use of batteries can cause electrolyte
leakage and will corrode the compartment or cause
the batteries to burst.
• Do not mix battery types: e.g. alkaline with carbon
zinc. Only use batteries of the same type for the
set.
• When inserting new batteries, do not try to mix old
batteries with the new ones.
• Batteries contain chemical substances, so
they should be disposed of properly.
Using AC Power
1. Check if the AC power supply, as shown on the
type plate located on the bottom of the set,
corresponds to your local power supply. If it does
not, consult your dealer or service centre.
2. If your set is equipped with a voltage selector,
adjust the selector so that it matches with the
local mains.
3. Connect the mains lead to the wall socket.
4. To disconnect the mains supply, unplug the set
from the wall socket.
The type plate is located on the bottom of the
set.
BASIC FUNCTIONS
Switching on and off and selecting function
1. To switch on, adjust the POWER slider to select:
CD, RADIO or TAPE function, and operate the
respective function controls.
2. To switch off, adjust the POWER slider to select
TAPE/OFF and make sure all the
cassette keys are released.
Note : The DBB setting, tuner presets and the vol-
ume will be retained in the set's memory.
Adjusting volume and sound (See 2)
1. Press the VOLUME 3 or 4 controls to adjust the
volume.
2. Press DBB once or more to select dynamic bass
boost on or off.
DIGITAL TUNER
DIGITAL TUNER
Tuning to radio stations
1. Adjust the POWER slider to RADIO.
™ tu is displayed briefly and then the radio
station frequency, waveband and, if pro-
grammed, a preset number are shown. (See 3)
2. Press BAND once or more to select your wave-
band.
3. Press and hold SEARCH ∞ or § until the
frequency in the display starts running.
™ The radio automatically tunes to a station of
sufficient reception. Display shows Srch
during automatic tuning.
4. Repeat step 3 if necessary until you find the
desired station.
To tune to a weak station, press ∞ or § briefly and
repeatedly until you have found optimal reception.
To improve radio reception:
• For FM, extend, incline and turn the telescopic aer-
ial. Reduce its length if the signal is too strong.
• For MW (AM), the set uses a built-in aerial. Direct
this aerial by turning the whole set.
Programming radio stations
You can store up to a total of 40 radio stations in the
memory, manually or automatically (Autostore).
Manual programming
1. Tune to your desired station (see Tuning to radio
stations).
2. Press PROGRAM to activate programming.
™ Display: Pr -- and PROG flashes.
3. Use the digit panel on the set to key in a number,
1-40, to select a preset station. E.g. press 1,1 if
you want to store your station as preset 11. (See
4)
• Remote control (AZ1515 models only): Press
-
+
PRESET
/
once or more to select a preset sta-
tion.
4. Press PROGRAM to confirm.
5. Repeat steps 1-4 to store other stations.
Note : You can erase a preset station by storing
another frequency in its place.
Advertisement
Table of Contents
