Screw specifications
M2 x L6 x D3.5 x T0.3
Step 3.
Pry up the latches and then remove the lower case.
Figure 3. Pry up the latches and remove the lower case
Go to
https://support.lenovo.com/partslookup
part:
Lower case
Remove the battery pack
Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 26
Step 1.
Disconnect the cable from the system board and remove five screws.
Attention: Do not pull the cable. Use your fingernail to disconnect the cable.
Number of screws
9
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
27