CD Player
To review a program
•
In the stop position, press PROG repeatedly
to see your stored track numbers.
Erasing a program
You can erase the contents of the memory
by:
– Pressing STOP 9 (twice during playback or
once in the stop position)
– Selecting MW, FM or TAPE/OFF sound
source;
– opening the CD door;
Display: PROG disappears.
Cassette playback
1 Adjust the source selector to
TAPE/OFF.
2 Press 9/ to open the cassette holder and
insert a cassette and close the deck.
3 Press 1 to start playback.
4 To pause playback press ;.
5 To resume, press ; again.
6 To stop the tape, press 9/.
Fast forwarding/rewinding
1 Press 5 or 6 until you reach your desired
passage.
2 Press 9/ to stop rewinding/fast forwarding.
Helpful hints :
- During playback, the keys are automatically
released at the end of a tape and the set is
switched off (unless PAUSE mode ; has been
activated.)
- During fast forwarding/rewinding, the keys will
not be released at the end of a tape. To switch
off the set, make sure the cassette keys are
also released.
Cassette Recorder
General information on recording
•
Recording is permissible insofar as copyright
or. other rights of third parties are not
infringed.
•
For recording, use only NORMAL type cas-
settes (IEC type I) on which the tabs have not
yet been broken.This deck is not suited for
recording on CHROME (IEC II) or METAL
(IEC IV) type cassettes.
•
The best recording level is set automatically.
Altering the VOLUME will not affect the
recording.
•
To protect a tape from accidental erasure,
break out the tabs. If you wish to record
again, cover the tabs with a piece of adhesive
tape.
CD synchro start recording
1 Select CD source.
2 Insert a CD and if desired, program track
numbers.
3 Press 9/ to open the cassette holder. Insert
a blank tape and close the deck.
4 Press 0 to start recording.
Playing of the CD/program starts auto-
matically from the beginning. It is not
necessary to start the CD player sepa-
rately.
5 For brief interruptions press ;. To resume
recording, press ; again.
6 To stop recording, press 9/.