Philips Satinelle super sensitive HP6445/00 Instructions For Use Manual page 8

ENGLISH
8
When you use the appliance for the first time, we advise you to
try it out on an area with only light hair growth to get
accustomed to the epilation process.
After epilation you can apply a mild cream or body milk to
soothe your skin and reduce skin irritation.
Epilation is easier just after taking a bath or shower. Make sure
your skin is completely dry when you start epilating.
We advise you to epilate before going to bed at night, as this will
allow any skin irritation that may develop to diminish overnight.
How to use the epilator
Make sure your skin is clean, entirely dry and free from grease.
Do not use any cream before you start epilating.
1 Put the adapter plug (J) in the wall socket.
2 Insert the appliance plug (H) into the inlet socket (G) (fig. 2).
3 Remove the protective cap (A) (fig. 3).
4 Switch the appliance on by pushing the on/off slide (F) to the
desired speed setting.
Select speed I (fig. 4) for areas with little hair growth and for areas
where bones are located directly beneath the skin, such as knees and
ankles. Select speed II (fig. 5) for larger areas with stronger hair growth.
5 Stretch the skin with your free hand to make the hairs stand
upright (fig. 6)
6 Place the epilating head (D) perpendicularly onto the skin so that
the epilating head (D) and the pain softener (E) are in proper
contact with the skin.
7 Move the appliance slowly, with the pain softener (E) pointing
forwards, against the direction of hair growth. Do not exert any
pressure.
8 Stretch your leg when you are epilating the back of your knee.