Table of Contents
Advertisement
CD/MP3 Player
About MP3
The music compression technology MP3
(MPEG1 Audio Layer 3) significantly reduce
the digital data of an audio CD while main-
taining CD quality sound.
Getting MP3 files: you can either down-
•
load legal music files from the internet to
your computer hard disc, or create such files
by converting audio CD files in your comput-
er through appropriate encoder software.
(128kbps bit rate or higher is recommended
for MP3 files.)
Creating a MP3 CD: burn the music files
•
from your computer hard disc on a CDR or
CDRW using your CD burner.
Helpful hints:
–
Make sure that the file names of the MP3 files
end with .mp3.
–
Total number of music files and albums: around
350 (with a typical file name length of 20 char-
acters)
–
The length of file names affects the number of
tracks for playback. With shorter file names,
more files can be burned on a disc.
Playing a disc
•
This CD player plays Audio Discs including
CD-R/CD-RW and MP3-CD. Do not try to
play a CD-ROM, CD-I, CDV,VCD, DVD or
computer CD.
IMPORTANT!
CDs encoded with copyright protection
•
technologies by some record companies may
be unplayable by this product.
1 Adjust the Source selector to CD/MP3.
2 Open the CD door, and insert a CD/MP3
with the printed side facing up, then press
the CD door gently to close.
➜ Display shows flashing r r E E A A d d , indicating
the disc reading, then the total track num-
ber and playing time. "CD" is also display
(See 3).
➜ For MP3: "MP3" and the total album
number are also displayed (See 4).
3 Press 2; to start playback.
➜ Display shows current track number and
the elapsed time of the track.
4 To pause playback, press 2;.
➜ Display:The elapsed playing time flashes.
5 To resume, press 2; again.
6 To stop CD playback, press 9.
Helpful hints:
CD play will also stop when:
–
you open the CD door;
–
you select TUNER or OFF;
–
the CD has reached the end.
Selecting a different track
• Press TUNING ∞/ § once or repeatedly
until the desired track number appears in the
display.
For MP3: First press ALB/PRE +/- once or
more to find your album.
• In the pause/stop position, press 2; to start
playback.
Finding a passage within a
track
1 During playback, press and hold TUNING
∞/ §.
➜ The CD/MP3 is played at high speed and
with reduced volume.
2 When you recognize the passage you want,
release TUNING ∞/ § to resume normal
playback.
Helpful hints:
–
When your searching reaches the end of the
last track, the CD/MP3 goes to stop mode.
Advertisement
Table of Contents
