Table of Contents
Advertisement
Connecting a TV set
Note:
– Connect the system directly to the TV set.
●
Use the supplied composite video cable (yellow)
to connect the system's VIDEO OUT jack to
the video input jack (or labeled as A/V In, Video
In, Composite or Baseband) on the TV set.
●
To listen to disc playback of the system through
your TV, use the supplied audio cables to
connect AUDIO OUT jack (black) to the
corresponding AUDIO IN jacks ( red/white) on
the TV set.
OUT
IN
Connecting the power cord
IMPORTANT!
– If your system is equipped with a
Voltage Selector, set the VOLTAGE
SELECTOR (located on the back of the
set) to match the local power line.
– The type plate is located on the rear
of the set.
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
Pb/Cb
VIDEO IN
Y
●
After everything is connected properly, plug in
the AC power cord to the power socket.
Never make or change any connection
with the power switched on.
Note:
– The set is operated on AC power only.
Notes:
- The type plate is located on the bottom of the
set.
- Never make or change any connection wih the
power switched on.
Connection
~ AC MA INS
9
Advertisement
Table of Contents
