Philips AZ1326/12 User Manual page 4

•
Install all batteries correctly, + and - as marked on
the unit.
•
Do not mix batteries (old and new or carbon and
alkaline, etc.).
•
Remove batteries when the unit is not used for a
long time.
Apparatus shall not be exposed to dripping or splashing.
p
Do not place any sources of danger on the apparatus
q
(e.g. liquid fi lled objects, lighted candles).
This product may contain lead and mercury. Disposal of
r
these materials may be regulated due to environmental
considerations. For disposal or recycling information,
please contact your local authorities or the Electronic
Industries Alliance: www.eiae.org.
Safety-Important notes for users in the U.K.
Mains plug
This apparatus is fi tted with an approved 13 Amp plug. To
change a fuse in this type of plug proceed as follows:
Remove fuse cover and fuse.
a
Fix new fuse which should be a BS1362 3 Amp, A.S.T.A.
b
or BSI approved type.
Refi t the fuse cover.
c
If the fi tted plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fi tted in its place.
If the mains plug contains a fuse, this should have a value of 3
Amp. If a plug without a fuse is used, the fuse at the distribution
board should not be greater than 3 Amp.