Philips 1000 Series Manual page 13

3 Turn the lock anticlockwise (1) and remove the
2
retaining frame (2).
1
4 Remove and clean one shaving head at a time.
Each shaving head consists of a cutter and a
guard.
5 Remove the cutter from the shaving guard and
clean both parts under the tap.
Note: Do not clean more than one cutter and
guard at a time, since they are all matching sets.
If you accidentally mix up the cutters and
guards, it may take several weeks before
optimal shaving performance is restored.
6 Put the shaving heads back into the shaving
unit.
Note: Make sure the notches on both sides of
the shaving heads fit exactly onto the
projections in the shaving head holder.
7 Put the retaining frame back into the shaving
1
unit (1) and turn the lock clockwise (2).
2
13
English