Philips AZ1027/96 User Manual page 20

Philips cd soundmachine az1027 cd tape
Table of Contents

Advertisement

5
Troubleshooting
Warning
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the
following points before requesting service. If the problem remains
unsolved, go to the Philips web site (www.Philips.com/support), or
contact Philips (see Contact information). When you contact Philips,
ensure that the apparatus is nearby and the model number and serial
number are available.
No power
Ensure that the power cord is connected securely.
Ensure that there is power at the power supply socket.
Ensure that the batteries are installed correctly.
No sound
Adjust the volume.
Ensure that the track played is of a compatible format.
Display does not function properly./No reaction to operation of any
of the controls.
1
Disconnect the AC power cord.
2
Connect the AC power cord after a few seconds.
Cannot play disc
Ensure that the disc label is inserted with the printed side facing
up.
Wipe the disc with fibre cleaning cloth from the centre to the
edge in a straight line.
This disc may be defective. Play another disc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Az1027

Table of Contents