HP 9000 700 Series Owner's Manual page 115

19. If the correct total memory is
and remove the board computer.
a. Verify that the RAM cards are installed in adjacent pairs (front pair or
rear pair).
b. Verify that no RAM card connectors are dirty.
20. Turn o power and remove the board computer.
21. Reinstall the RFI cover.
22. Replace and tighten the RFI cover screw.
23. Reinstall the Model V743 VXI controller in the mainframe.
24. Replace the screws in the board computer front panel.
not listed, turn o the VXIbus mainframe
Installing Additional Memory
A
A-9