Philips FWB-C85/00 User Manual page 14

CD
DISC CHANGE
DISC 1
MINI HIFI SYSTEM
STANDBY
ON
POWER SAVE
IR SENSOR
CD 1•2•3
BAND
C1 • 2 • 3 CD BAND TUNER
SEARCH•TUNING STOP•CLEAR
CLOCK/
PROG
TIMER
BASS
PLUS
Warning!
1) This system is designed for conventional CDs. Do not use any accessories
such as disc stabilizer rings or CD treatment sheets, etc., which may damage
the CD mechanism.
2) Do not load more than one disc into each tray.
3) When the CD changer is loaded with CDs, do not turn over or shake the
system. This may jam the changer.
You may load three discs in the CD changer for continuous playback without
interruption.
14
pg 01-29/C85-C83/22-Eng 14
OPEN•CLOSE
DISC 2 DISC 3
3 C D
C H A N G E R
DOLBY B NR
NEWS/TA
RDS
TAPE 1•2 CDR/DVD CD TEXT
TAPE AUX CDR
PRESET
PLAY PAUSE PREV SIDE NEXT
DUB
DIM A. REV RECORD
(HSD)
TREBLE
wOOx
TECHNOLOGY LEVEL
CD Text
It will enable you to know which album and
its track you are selecting or playing on
specially encoded CD.
• Press RDS (CD TEXT).
At stop mode
™ The title of album or total playing
time will be displayed.
During Playback
™ The title of album, track title or
elapsed time will be displayed.
• If the album and track title are not
known.
™ "NO TEXT ON DISC" will be
displayed.
Discs for playback
This system can play all digital audio CD,
finalized digital audio CD-Recordable and
finalized digital audio CD-Rewritable
format discs.
3/6/00, 1:00 PM
Loading the CD Changer
1 Press CD to select CD mode.
2 Press OPEN•CLOSE.
™ The CD carousel tray slides out.
3 Load a CD with the printed side up in
the right tray.
• You can load another disc in the left
tray.
• To load the third disc, press the DISC
CHANGE button.
™ The CD carousel will rotate until the
empty tray is ready for loading.
4 Press OPEN•CLOSE to close the CD
carousel tray.
™ The total number of tracks and the
playing time of the selected disc
appear on the display.
Note:
– To ensure good system performance,
wait until the CD changer completely
reads the disc(s) before proceeding.
CD Direct Play
• You can play a CD directly by pressing
the DISC 1, DISC 2 or DISC 3 button.
The CD player will stop at the end of
playback of the selected disc.
™ A lit button indicates that a disc is
loaded in the disc tray.
™ The selected disc is encircled.
3139 116 19611