Philips FW-C80/22 User Manual page 12

OPERATING THE SYSTEM
DIM 3 - half brightness with Spectrum
Analyzer Off and all LEDs on the
system will be switched off.
Volume Control
Adjust VOLUME to increase or decrease
the sound level.
For Personal Listening
Connect the headphones plug to the n
socket at the front of the system. The
speakers will be muted.
MUTE (only on remote control)
This feature allows you to temporarily
switch off the sound without switching off
the system when you require a moment of
silence.
1 Press MUTE on the remote control to
switch off the sound.
™ "MUTE" will be displayed.
2 Press MUTE again on the remote
control or increase the VOLUME level
to switch on the sound.
12
pg 01-26/C80/22-Eng 12
Sound Control
For Optimal sound listening, you can
only select one of the following sound
control at a time : DSC, VEC or BASS/
TREBLE.
DIGITAL SOUND CONTROL (DSC)
The DSC feature enables you to adjust the
system to suit your type of music.
1 Press to select the DSC feature.
2 Adjust the JOG to select the desired
Digital Sound Control setting :
OPTIMAL, CLASSIC, TECHNO, VOCAL,
ROCK or JAZZ.
™ The selected digital sound is
encircled.
™ "OPTIMAL, CLASSIC, TECHNO,
VOCAL, ROCK or JAZZ" will be
displayed.
Note:
– For neutral setting, select CLASSIC.
VIRTUAL ENVIRONMENT CONTROL
(VEC)
The VEC feature enables you to adjust the
system to select a type of environment.
1 Press to select the VEC feature.
2 Adjust the JOG to select the desired
Virtual Environment Control setting :
HALL, CLUB, DISCO, CINEMA,
CONCERT or ARCADE.
™ The selected environment is
encircled.
™ "HALL, CLUB, DISCO,
CINEMA, CONCERT or
ARCADE" will be displayed.
BASS/TREBLE
The BASS/TREBLE features enable you to
define the sound processor settings for
Bass and Treble.
1 Press to select the BASS/TREBLE
feature.
™ The BASS and TREBLE LED will be lit.
™ "ADAPT BASS AND TREBLE
LEVELS" will be displayed.
2 Use BASS/TREBLE CONTROL to select
the desired BASS or TREBLE level
respectively.
™ The BASS/TREBLE level will increase
or decrease between level +3 and
-3.
• Press BASS 3 or 4 to select the low
tone level.
™ "BASS -X or BASS +X" will be
displayed.
• Press TREBLE 3 or 4 to select the
high tone level.
™ "TREBLE -X or TREBLE +X"
will be displayed.
Note:
– " X " denotes the sound level.
3/6/00, 2:23 PM
wOOx
There are three wOOx settings to enhance
the bass response.
1 Press wOOx PLUS (or wOOx on the
remote control) to select between
normal or enhanced wOOx effect.
• When normal wOOx sound effect is
selected;
™ The OO display is switched off.
W X
™ "WOOX NORM" will be displayed.
• When enhanced wOOx sound effect is
selected;
™ The OO appears on the display.
W X
2 Press wOOx LEVEL to select the
desired levels of wOOx.
™ The OO display lights up.
W X
™ "WOOX 1, WOOX 2 or WOOX 3"
will be displayed.
Notes:
– When Bass/Treble sound control is
selected, wOOx will be switched off
automatically.
– Some CDs or tapes might be recorded in
high modulation. It may cause distortion
at high volume. If this occurs, switch off
wOOx or reduce the volume.
Automatic DSC-wOOx / VEC-wOOx
selection
The best wOOx setting is generated
automatically for each DSC or VEC
selection. You can manually select the
wOOx setting that best suits your listening
environment.
3139 116 19681