Tidying Cables - LG 42PN4500 Owner's Manual

CAUTION
Disconnect the power before moving
y
or installing the TV. Otherwise electric
shock may occur.
If you install the TV on a ceiling or slanted
y
wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this
y
may cause damage to the TV and void
your warranty.
Use only screws and wall mounts that
y
meet the VESA standard. Any damages
or injuries by misuse or using an
improper accessory are not covered by
the warranty.
NOTE
Use only screws that are listed on the
y
VESA standard screw specifications.
The wall mount kit includes an installation
y
manual and necessary parts.
The wall mount bracket is optional. You
y
can obtain additional accessories from
your local dealer.
The length of screws may differ
y
depending on the wall mount. Make sure
to use the proper length.
For more information, refer to the manual
y
supplied with the wall mount.
ASSEMBLING AND PREPARING

Tidying Cables

1
Install the power cord holder and power cord.
It will help prevent the power cable from being
removed by accident.
2
Gather and bind the cables with the cable
holder.
(For 42PN4500)
Cable Holder
(For 50PN4500, 50/60PN6500)
Cable Holder
CAUTION
Do not move the TV by holding the cable
y
holder and power cord holder, as the
cable holders may break, and injuries and
damage to the TV may occur.
NOTE
If you install the TV on a Wall, detach the
y
cable holder from stand body and attach
it to the protection cover or to the back
cover to help keep the cables organize.
17
Power Cord Holder
(Depending on model)
Power Cord Holder
(Depending on model)