Back Cover For Wire Arrangement; Careful Installation Advice; Not Using The Desk-Type Stand - LG 42PJ2 Series Owner's Manual

BACK COVER FOR WIRE
ARRANGEMENT
■ Image shown may differ from your TV.
After Connecting the cables as necessary, install
Cable Holder as shown and bundle the cables.
NOT USING THE DESK-
TYPE STAND
■ Image shown may differ from your TV.
When installing the wall-mounted unit, use the pro-
tection cover. Insert the Protection cover into the
TV until clicking sound.
(Fixate the unit so that the guide is on the outer side.)
CAREFUL INSTALLATION
ADVICE
■ You should purchase necessary components to
■ Position the TV close to the wall to avoid the
■ The instructions shown below are a safer way to
Cable Holder
1
2
3
!
Protection Cover
► When moving the TV undo the cords first.
► Use a platform or cabinet strong and large enough
?
► To use the TV safely make sure that the height of
fix the TV safety and secure to the wall from the
market.
possibility of it falling when pushed.
set up the TV, by fixing it to the wall, avoiding
the possibility of it falling forwards if pulled. This
will prevent the TV from falling forward and
causing injury. This will also prevent the TV
from damage. Ensure that children do not climb
or hang from the TV.
1
2
Use the eye-bolts or TV brackets/bolts to fix the
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then
bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the wall.
Match the height of the bracket that is mounted on
the wall.
Use a sturdy rope to tie the product for alignment.
It is safer to tie the rope so it becomes horizontal
between the wall and the product.
NOTE
to support the size and weight of the TV.
the bracket on the wall and on the TV is the same.
1
2
3
11