Radio Reception - Sony XAV-AX200 Operating Instructions Manual

The operation buttons do not function.
-+
Press the reset button (page 5).
Radio reception
The stations cannot be received.
The sound is hampered by noise.
-+
The connection is not correct.
- Connect the REM OUT lead {blue/white striped}
or accessory power supply lead (red) to the
power supply lead of a car's antenna (aerial}
booster (only when your car has built-in radio
antenna (aerial} in the rear/side glass).
- Check the connection of the car antenna
(aerial}.
- If the auto antenna (aerial} will not extend,
check the connection of the power antenna
(aerial} control lead.
Preset tuning is not possible.
-+
The broadcast signal is too weak.
PTY displays [PTY not found.].
-+
The current station is not a RDS station.
-+
RDS data has not been received.
-+
The station does not specify the program type.
Picture
There is no picture/picture noise occurs.
-+
A connection has not been made correctly.
-+
Check the connection between this unit and
other equipment and set the input selector of the
equipment to the source corresponding to this
unit.
-+
The disc is defective or dirty.
-+
Installation is not correct.
- Install the unit at an angle of less than 45° in a
sturdy part of the car.
-+
The parking cord {light green) is not connected to
the parking brake switch cord, or the parking
brake is not applied.
The picture does not fit in the screen.
-+
The aspect ratio is fixed on the playback source.
There is no picture/picture noise occurs in the
rear monitor.
-+
The color system setting is incorrect.
- Set the color system to [PAL] or [NTSC]
according to the connected monitor (page 17).
-+
A picture from the camera is displayed on this
unit.
- No picture appears in the rear monitor if a
picture from the camera is displayed on this
unit.
-+
Only DVD/USB video playing on this unit can be
displayed in the rear monitor.
24GB
-+
While displaying the picture from the cameras or
car navigation system on this unit, the picture
from DVD/USB video is not displayed in the rear
monitor.
There is no sound/sound skips/sound cracks.
-+
A connection has not been made correctly.
-+
Check the connection between this unit and the
connected equipment and set the input selector
of the equipment to the source corresponding to
this unit.
-+
The disc is defective or dirty.
-+
Installation is not correct.
- Install the unit at an angle of less than 45° in a
sturdy part of the car.
-+
The unit is in pause/reverse/fast-forward mode.
-+
The settings for the outputs are not made
correctly.
-+
The DVD audio level is too low (page 13}.
-+
The volume is too low.
-+
The ATT function is activated.
-+
The format is not supported.
- Check if the format is supported by this unit
(page 20}.
Sound is noisy.
-+
Keep cords and cables away from each other.
The disc does not play.
-+
The disc is defective or dirty.
-+
The disc is not playable.
-+
The DVD is not playable due to the region code.
-+
The disc format and file version are incompatible
with this unit (page 19}.
-+
Press
~
to remove the disc.
Certain functions cannot be performed.
~
Depending on the disc, you may not be able to
perform operations such as stop, search, or
repeat/shuffle play. For details, refer to the
manual supplied with the disc.
The soundtrack/subtitle language or angle
cannot be changed.
-+
During playback, touch
•=·
then make the
desired settings.
-+
Multilingual tracks, multilingual subtitles, or
multi-angles are not recorded on the DVD.
-+
The DVD prohibits changing.
The disc will not eject.
The disc will not insert.
-+
Press and hold the disc eject button.