ION Boombox Deluxe Quick Start Manual page 11

Playback
Playing a Tape:
1. Press the Stop/Eject button to open the cassette holder.
2. Insert a tape and close the cassette holder.
3. Press the Play button to play the tape.
IMPORTANT! After extensive usage, tape heads can acquire oxide build-up, especially if the
cassettes are old. To ensure best performance, use a tape head cleaner periodically.
Aux In Playback:
1. Connect your smartphone, MP3 player, or similar device to the Aux Input using an 1/8" (3.5
mm) cable (not included).
2. Set the Function switch to Aux.
3. Start playback on your external audio device.
4. Adjust the Volume dial to the desired level.
Note: If the line output of your external device is connected, you only need to adjust the system's
volume control. If your external device's headphone output is connected, you may need to adjust the
volume control on both your external device and Boombox Deluxe to achieve the desired volume.
USB Flash Drive Playback:
Note: When the function switch is set to BT/USB/SD, it will default to BT mode always. In order to
go to USB mode, insert the USB flash drive and press the Mode button to switch.
Note: In USB mode, files are played in order by time.
1. Connect the USB flash drive to the USB port.
2. Set the Function switch to BT/USB/SD and press the Mode button to switch to USB mode.
3. Press the Play button to begin playback.
4. Press the side panel Stop button to stop playback.
Micro SD Card Playback:
Note: When the function switch is set to BT/USB/SD, it will default to BT mode always. In order to
go to SD mode, insert the micro SD card and press the Mode button to switch.
Note: In SD mode, files are played in order by time.
1. Insert the micro SD card into the micro SD card slot.
2. Set the Function switch to BT/USB/SD and press the Mode button to switch to SD mode.
3. Press the Play button to begin playback.
4. Press the side panel Stop button to stop playback.
11